• products-banner

Product

Personalized skin-friendly stain resistant thermoplastic elastomer SI-TPV for smartwatch strap

Si-TPV® 3520-70A Thermoplastic Elastomer is a soft touch, skin-friendly thermoplastic elastomer with excellent bonding to PC,ABS,TPU and similar polar substrates. It is a product developed for silky touch overmolding on wearable electronics, accessory cases for electronic devices,watch bands.


Product Detail

Product Tags

Sample service

As for aggressive selling prices, we believe that you will be searching far and wide for anything that can beat us. We are able to state with absolute certainty that for such good quality at such costs we’ve been the lowest around for Personalized skin-friendly stain resistant thermoplastic elastomer SI-TPV for smartwatch strap, We sincerely do our greatest to offer the best assistance for all the customers and businessmen.
As for aggressive selling prices, we believe that you will be searching far and wide for anything that can beat us. We are able to state with absolute certainty that for such good quality at such costs we’ve been the lowest around for Si-TPV,Thermoplastic Elastomer,Low COF,Over-Molding TPE/TPU,Thermoplastic Elastomer TPV,Silicone Elastomer, Adhering to the principle of “Enterprising and Truth-Seeking, Preciseness and Unity”, with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective products and meticulous after-sales service. We firmly believe that: we are outstanding as we are specialized.

DESCRIPTION

SILIKE Si-TPV® thermoplastic elastomer is a patented dynamic vulcanized thermoplastic silicone-based elastomer which made by a special compatible technology to help silicone rubber dispersed in TPU evenly as a 2~3 micron particles under microscope.Those unique materials combine the strength,toughness and abrasion resistance of any thermoplastic elastomer with desirable properties of silicone:softness,silky feel,UV light and chemicals resistance which can be recycled and reused in traditional manufacturing processes.

 Si-TPV® 3520-70A thermoplastic elastomer is a material with good abrasion and soft silky feel which can excellent bond to PC,ABS,TPU and similar polar substrates. It is a product developed for silky touch overmolding on wearable electronics, accessory cases for electronic devices,watch bands.

APPLICATIONS

Solution for soft touch over molding on smart phones, portable electronic cases, smartwatch wristband, straps,and other wearable electronic devices.

TYPICAL PROPERTIES

Test*

Property

Unit

Result

ISO 868

Hardness (15 seconds)

Shore A

71

ISO 1183

Specific Gravity

1.11

ISO 1133

Melt Flow Index 10 kg & 190°C

g/10 min

48

ISO 37

MOE ( Modulus of elasticity) 

MPa

6.4

ISO 37

Tensile Strength

MPa

18

ISO 37

Tensile Stress @ 100% Elongation

MPa 2.9

ISO 37

Elongation at break

% 821
ISO 34 Tear Strength kN/m 55
ISO 815 Compression Set 22 hours @ 23°C % 29

*ISO: International Standardization Organization ASTM: American Society for Testing and Materials

FEATURES & BENEFITS

(1) Soft silky feel

(2) Good scratch resistance

(3) Excellent bonding to PC, ABS

(4) Super hydrophobic

(5) Stain resistance

(6) UV stable

 

HOW TO USE

• Injection Molding Processing Guide

Drying Time

2–6 hrs

Drying Temperature

80–100°C

Feed Zone Temperature

150–180°C

Center Zone Temperature

170–190°C

Front Zone Temperature

180–200°C

Nozzle Temperature

180–200°C

Melt Temperature

200°C

Mold Temperature

20–40°C

Injection Speed

Med

These process conditions may vary with individual equipment and processes.

  Secondary Processing

As a thermoplastic material, Si-TPV®  material can be secondary processed for ordinary products

 Injection Molding Pressure

The holding pressure largely depends on the geometry, thickness and gate location of the product. The holding pressure should be set to a low value at first, and then slowly increase until no related defects are seen in the injection molded product. Due to the elastic properties of the material, excessive holding pressure may cause serious deformation of the gate part of the product.

•  Back pressure

It is recommended that the back pressure when the screw is retracted should be 0.7-1.4Mpa, which will not only ensure the uniformity of melt melting, but also ensure that the material is not severely degraded by shear. The recommended screw speed of Si-TPV® is 100-150rpm to ensure the complete melting and plasticization of the material without material degradation caused by shear heating.

 

HANDLING PRECAUTIONS

A desiccant dehumidifying dryer is recommended for all drying.

Product safety information required for safe use is not included in this document. Before handling, read product and safety data sheets and container labels for safe use,  physical and health hazard information. the safety data  sheet is available on the silike company website at siliketech.com ,or from distributor, or by calling Silike customer service.

USABLE LIFE AND STORAGE

Transport as non-hazardous chemical. Store in a cool , well ventilated place. Original characteristics remain intact for 24 months from the production date , if kept in recommend storage.

PACKAGING INFORMATION

25KG / bag , craft paper bag with PE inner bag.

LIMITATIONS

This product is neither tested nor represented as suitable for medical or pharmaceutical uses.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.

 

As for aggressive selling prices, we believe that you will be searching far and wide for anything that can beat us. We are able to state with absolute certainty that for such good quality at such costs we’ve been the lowest around for Personalized skin-friendly stain resistant thermoplastic elastomer SI-TPV for smartwatch strap. We sincerely do our greatest to offer the best assistance for all the customers and businessmen.
Personalized skin-friendly stain resistant thermoplastic elastomer SI-TPV for smartwatch strap. Adhering to the principle of “Enterprising and Truth-Seeking, Preciseness and Unity”, with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective products and meticulous after-sales service. We firmly believe that: we are outstanding as we are specialized.


  • Previous:
  • Next:

  • FREE SILICONE ADDITIVES AND Si-TPV SAMPLES MORE THAN 100 GRADES

    Sample type

    $0

    • 50+

      grades Silicone Masterbatch

    • 10+

      grades Silicone Powder

    • 10+

      grades Anti-scratch Masterbatch

    • 10+

      grades Anti-abrasion Masterbatch

    • 10+

      grades Si-TPV

    • 8+

      grades Silicone Wax

    Write your message here and send it to us